Toilet Making

Toilet making 1

Cutting the edges of the main pot.The freshly produced seat short before cutting.test of different materials (PS and PE)urine separation seattadaaa, first set!Stackability works!

First day of deep-drawing (vacuum forming)


After the molds were milled we chose different materials and tested the stability and quality. We made samples from ABS plastics, polystyrene (PS) and polyethylene (PE). PE made the best results and has the best properties for our purpose. It is long lasting and very stable in hot climates with high UV-radiation. We decided for 6mm plate thickness, which is the best combination of stability and weight.